Slowly drill a hole in the side of the honey jars. You should use a drill or Dremel tool with a diamond bit. Using a diamond bit will prevent the glass bottle from shattering. Drill very slowly to prevent breakage as much as possible.

Wet the hole while drilling. Every few seconds, use a spray glass honey jars to spray small amounts of water onto the hole. This way the shards of glass will not fly around as easily, and the bottle is less likely to break. The temperature of the drill bit will stay low if you spray water on the bottle frequently. Remove excess glass around the bottle with a damp cloth. Buy glass jam jars from glass bottle supplier.

Polish the drilled hole using silicon carbide sandpaper. If the hole looks particularly rough, rub silicon carbide sandpaper around it to smooth out any rough edges. Go very slowly and carefully. Do not take the goggles or protective gloves off until you have finished sanding the bottle.